| Stage 1. Hayabusa turbo kit 320hp at tyre / 360hp at engine @ 20psi boost | |
| Turbo Kit Parts | |
| Modified mitsubishi turbo with integral wastegate and blow off valve | 750.00 |
| Headers | 450.00 |
| aluminium airbox plenum | 260.00 |
| brackets and fasteners | 30.00 |
| oil feed line and fittings to turbo | 40.00 |
| oil return line and fittings from turbo | 60.00 |
| Air hoses and joining pieces | 60.00 |
| oil cooler hoses and fittings | 60.00 |
| vacuum and fuel hoses and fittings | 40.00 |
| air filter | 30.00 |
| clutch spring kit with spacers and bolts | 50.00 |
| Parts Total | 1,830.00 |
| Engine Kit Parts | |
| Turbo pistons | 450.00 |
| adjustable cam sprockets | 140.00 |
| Cometic steel head gasket | 50.00 |
| cyl' barrel spacer | 40.00 |
| clutch spring kit with spacers and bolts | 50.00 |
| Parts Total | 730.00 |
| Fuelling | |
| uprated injectors 480cc, fittings, etc | 260.00 |
| Fuel pump | 150.00 |
| Fuel regulator | 90.00 |
| Parts Total | 500.00 |
| Parts and Labour Total | 3,060.00 |
| Engine Labour | 250.00 |
| Electrical Options | |
| Option 1:-Piggyback system using dynojet pc3, etc | |
| powercommander 3usb | 220.00 |
| Dynojet universal hub (allows fuel map against throttle and boost) | 110.00 |
| 3bar map sensor and connectors | 80.00 |
| Parts Total | 410.00 |
| Option 2:-MBE 9A4 ecu complete stand alone system | |
| full wiring harness | 400.00 |
| injetcor sub harness | 50.00 |
| boost harness and 3 bar Map sensor | 80.00 |
| 9A4 ecu (fully mapable, ign, fuel, boost, temp and pressure compensations, etc) | 530.00 |
| Parts Total | 1,060.00 |
| Optional / Recommended Extras: | |
| Carrillo Conrods | 750.00 |
| 12mm cylinder stud conversion inc studs and spacers | 150.00 |
| labour to strip and build bottom end to fit rods and machine for 12mm | 200.00 |
| Dyno time to run in and mapping | 250.00 |
| intercooler | 400.00 |
| charge cooler and water pump (also requires secondary radiator) | 550.00 |
| St.St link pipe turbo to silencer | 170.00 |
| Turbosmart Eboost 2 electronic 6 stage boost controller | 320.00 |
| MBE 985 dash and wiring loom | 420.00 |
| Heavy duty output shaft | 260.00 |
| Output shaft drive flange to suit new shaft splines | 40.00 |
| All prices excluding UK vat @ 17.5% |