 |
 |
 |
 |
 |
 |
 |
 |
| Hi V8 Cylinder engine prices and specifications | |
| 2800cc 400hp, 220ft/lbs. , 450hp 2900cc, 500hp 3000cc and 1000hp twin turbo 2800cc options available | |
| Base 2.8 liter V8 is approx' 400 hp. Engine is inclusive of hardware as described below.... | |
| · 6061-T6 Billet crankcase, sump, front cover and rear cover | |
| · Suzuki parts- stock heads, cylinders and throttle bodies (with stock 240cc injectors) | |
| · 67mm stroke 4340 billet crankshaft | |
| · Forged CP pistons | |
| · 12mm dia heavy duty cylinder studs | |
| · Engine mounted sensors | |
| · Carrillo H-beam connecting rods | |
| · Kent high lift cams and adjustable vernier sprockets | |
| · Starter motor and 60amp mini alternator | |
| · 4 stage Pace or Aviaid dry sump oil pump | |
| · Small flywheel for 5.5” clutch or large flywheel for 7.25” clutch | |
| · Custom rear engine adapter plate for popular gearboxes | |
| · 40mm billet velocity stacks and adapter seals | |
| · Test run engine | |
| · Installation Manual & Technical support as required for successful installation and operation | |
| Total | £20,200 |
| Dyno and engine testing | |
| Dyno mapping, running in and test | £400.00 |
| Dyno fuel, oil, consumables | £50.00 |
| Available Engine performance upgrades / options | |
| Overbored and replated cylinders to 83mm (2900cc) per pair | £800.00 |
| Overbored and replated cylinders to 84mm (3000cc) per pair | £800.00 |
| Gasflowed Cylinder heads per pair | £1,000.00 |
| high capacity billet fuel rail (-6 JIC fittings each end instead of stock push on type) per pair | £200.00 |
| uprated 480cc fuel injectors and adaptors (for high spec 2.8, 2.9 & 3.0) two sets | £500.00 |
| uprated 750cc fuel injectors and adaptors (for turbo version) two sets | £500.00 |
| Available Electrical Parts / Engine Management | |
| · MBE 9A4 ecu, sensors, etc | £1,400.00 |
| · MOTEC M800 ecu, sensors, etc | £2,700.00 |
| · EFI Euro4 ecu, sensors, etc | £2,200.00 |
| · DTA S80Pro ecu, sensors, etc | £1,200.00 |
| Available Dash / display Options | |
| · MBE | £400.00 |
| · MOTEC SDL | £1,450.00 |
| · AIM MXL | £900.00 |
| · DTA X dash | £1,300.00 |
| Available Transissions / Gearboxes Options | |
| · Mhewland, Sadev, Modena, Quaife gearboxes all available | POA |
| HOLESHOT TURBO PARTS up to 850HP (all to suit full V8 engine) | |
| exhaust manifold to turbo, 1 left hand, 1 right hand | £1,200.00 |
| Garret GT28RS turbos externally wastegated, modified to Holeshot spec | £1,800.00 |
| Turbosmart blow off valves | £300.00 |
| Turbosmart 38mm external dual port wastegate | £500.00 |
| oil feed hoses to turbos | £100.00 |
| oil return hoses from turbos | £120.00 |
| air filters to turbos | £80.00 |
| fabricated airbox plenums | £580.00 |
| silicone joiners from plenum to throttle bodies and fixings | £40.00 |
| total | £4,720.00 |
| HOLESHOT TURBO PARTS up to 1000HP (all to suit full V8 engine) | |
| exhaust manifold to turbo, 1 left hand, 1 right hand | £1,300.00 |
| Garret GT30RS turbos externally wastegated, modified to Holeshot spec | £2,200.00 |
| Turbosmart blow off valves | £300.00 |
| Turbosmart 38mm external dual port wastegate | £500.00 |
| oil feed hoses to turbos | £100.00 |
| oil return hoses from turbos | £120.00 |
| air filters to turbos | £80.00 |
| fabricated airbox plenums | £580.00 |
| silicone joiners from plenum to throttle bodies and fixings | £40.00 |
| total | £5,220.00 |